ecg001f - g inga p hbt gain block product features ? ? ? ? ? 22? db gain at 1 ? ghz ? +12.5 ? dbm p1db at 1 ? ghz ? +25 ? dbm oip3 at 1 ? ghz ? 3.4 ? db noise figure ? internally m atched to 50 ? ? lead - free ? / ? green ? / ? rohs - c ompliant sot - 363 p ackage general description the ecg001f - g is a general - purpose buffer amplifier that offers high dynamic ra nge in a low - cost surface - mount package. at 1000 ? mhz, the ecg001f - g typically provides 22 ? db of gain, +25 ? dbm output ip3, and +12.5 dbm p1db. the ecg001f - g consists of a darlington - pair amplifier using t he high reliability ingap ? / ? gaas hbt process techn ology and only requires dc - blocking capacitors, a bias resistor, and an inductive rf choke for operation. the device is ideal for wireless applications and is available in a low - cost, surface - mountable lead - free ? / ? green ? / ? rohs - compliant sot - 363 package. all devices are 100% rf and dc tested. th is broadband mmic amplifier can be directly applied to various current and next generation wireless technologies . in addition, the ecg001f - g will satisfy general amplification requirements in the dc to 6 ? ghz freque ncy range such as catv and mobile wireless. applications ? ? catv / satv / moca ? point to point ? defense & aerospace ? test & measurement equipment ? general purpose wireless ordering information part no. description ecg001f - g i ngap ? / ? gaas hbt gain block standard t/r size = 300 0 pieces on a 7 ? reel ecg001f-g 6 pin sot - 363 package functional block diagram pin configuration pin no. label 3 rf in 6 rf out 1, 2, 4, 5 gnd datasheet: rev . a 12- 05- 14 - 1 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
ecg001f - g inga p hbt gain block recommended operating conditions parameter min typ max units t case ?40 absolute maximum ratings parameter rating storage temperature ? ? rf input power, cw, 50, t=25 ? ? 150?ma elec trical specifications test conditions unless otherwise noted: v s upply? = v , t c ase ?=? ? ?=?51?, 50? system parameter conditions min typ max units operational frequency range dc 6000 mhz gain freq.=1000 mhz oip3 pout=? ?1 ?dbm?/?tone, f= 1?mhz 22.2 db output p1db +12.5 dbm output ip3 (1) +25 dbm gain freq.=2000 mhz 19.2 20.7 21.8 db input return loss 35 db output return loss 18 db output p1db +12.5 dbm noise figure 3.4 db device voltage ? ?? 270? c?/?w typical rf performance ( 1 ) test conditions unless otherwise noted: v s upply = +5 v, icc = 30 ma (typ.) , r bias ? ? ? ? ?? parameter typical units frequency 1 00 500 900 1900 2140 2400 3500 5800 mhz gain 22.8 22.6 22.4 20.9 20.6 20.2 18.6 15.5 db input return loss 48 46 42 35 29 28 22 14 db output return loss 34 29 24 18 17 16 13 8 db output p1db +11.6 +11.6 +12.6 +12.6 +12.6 +12.8 +12.2 +11 dbm output ip3 (2) +23.6 +23.5 +24.8 +26 +25.6 +25.4 +23 dbm noise figure 3.4 3.4 3.4 3.4 3.4 3.4 db notes: 1. gain and return loss values presented above , and in the plots of the following section , are measured at the device level. application specific performance va lues will differ in accordance with e xternal components select ed for the desired frequency band of operation. p1db, oip3 and nf data is measured using the application circuit shown on page 4. 2. pout= ? 1 dbm ? / ? tone , 1 ? mhz tone spacing. datasheet: rev . a 12- 05- 14 - 2 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
ecg001f - g inga p hbt gain block typical rf perfo rmance test conditions unless otherwise noted: v s upply = +5 v, icc = 30 ma (typ.) , r bias ? ? ? ?? ?40 ?40 typical device s - parameters test conditions unless otherwise noted: v device = +3.4 ? v, i cc = 30 ?ma, temp. =+ 25? c, calibrated t o device leads freq uency (mhz) s11 (db) s11 (ang) s21 (db) s21 (ang) s12 (db) s12 (ang) s22 (db) s22 (ang) 50 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 25.13 172.50 20.74 114.94 ? 23.12 9.11 ? 17.59 175.89 2500 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 22.91 160.22 17.05 57.38 ? 20.50 2.47 ? 12.47 116.41 5000 ? ? ? ? ? ? ? ? ? ? ? ? - 3 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
ecg001f - g inga p hbt gain block application circuit c1 c3 l1 c2 j3 j4 u1 r4 recommen ded component values (1) frequency (mhz) 50 500 900 1900 2200 2500 3500 l1 820 nh 220 nh 68 nh 27 nh 22 nh 18 nh 15 nh c1, c2, c 3 .018 uf 1000 pf 100 pf 68 pf 68 pf 56 pf 39 pf notes: 1. the values for the components are dependent upon the intended freq uency of operation. recommended bias resistor values v supply (v) 5 6 8 9 10 12 r4 () bill of material (1) reference des. value description manuf. part number u1 n/a ingap hbt gain block triquint ecg001f - g l 1 39 ? ? ? 51? +5?v . 4 c1 blocking capacitor rf out l1 rf ch oke c3 0.018 f r4 bias resistor rf in c4 bypass capacitor c2 blocking capacitor vcc icc = 30 ma ecg001f datasheet: rev . a 12- 05- 14 - 4 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
ecg001f - g inga p hbt gain block package marking and dimensions product marking : the top surface of the component will be marked with a two - digit numeric lot code (shown as ?xx?) followed by a ?4? designator . -h- -a- 4 3 5 4 3 .15 c d 2x -d- .30 c both sides (6x) b .10 c a-b d 5 -b- .10 c -c- 6x seating plane .15 c a-b 2x c a2 a1 a symbol a min max top view side view a1 a2 d e e1 l l1 l2 b c - 1.10 (0.043) 0.10 (0.004) 0 1.00 (0.039) 0.70 (0.028) 2.00 (0.079 basic 2.10 (0.083) basic 1.25 (0.049) basic 0.41 (0.016) 0.21 (0.008) 0.42 (0.017) ref 0.15 (0.006) basic 8`8 0`8 12`8 4`8 e 1.30 (0.051) basic c 0.65 (0.026) basic 0.30 (0.012) 0.15 (0.006) 0.08 (0.003) 0.22 (0.009) e1 e1/2 d e1 pin 1 id e/2 e e l2 gauge plane -c- seating plane ? 8x 01 e1 ? ?1 notes: 1. dimensions are in millimeters (inches) 2. dimensions and tolerances per asme y14.5m - 1194. package conforms to jedec mo - 203, issue b. pcb mounting pattern 4.064 [0.160] 2x 0.762 [0.030] 0.381 [0.015] 0.762 [0.030] 2.515 [0.099] 2x 1.207 [0.048] 16x ?.254 (.010) plated thru via holes 1.524 [0.060] 2x 0.773 [0.030] 1.301 [0.051] 2x 1.270 [0.050] 6.329 [0.249] 2x 0.203 [0.01] 2x 0.406 [0.016] 6 2x 0.939 [0.037] 4x 0.889 [0.035] 4x 0.889 [0.035] 2x 0.914 [0.036] 2x 0.387 [0.015] notes: 1. all dimensions are in millimeters (inches). angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. 3. vias are required under the backside paddle of this device for proper rf/dc grounding and thermal dissipation. 4. do not remove or minimize via hole structure in the pcb. thermal and rf grounding is critical. 5. we recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10?). 6. the rf i/o trace transition shown is to a 30 mil wide line. modify transition as required to interface with other line widths. xx4 datasheet: rev . a 12- 05- 14 - 5 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
ecg001f - g inga p hbt gain block product compliance information esd sensitivity ratings caution! esd - sensitive device esd rating: class 1 a value: ? 250 v to < ? 500 ?v t est: human body model (hbm) standard: esda/ jedec standard js - 001- 2012 solderability compatible with both lead - free (260 ? c maximum reflow temperature) and tin/lead (245 c maximum reflow temperature) soldering processes. contact plating: nipdau rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? msl rating msl rating: level 3 test: 260? c convection reflow standard: jedec standard ipc/jedec j - std - 020 contact information for the latest specifications, additional produ ct information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.503.615.9000 email: info - sales@t riquint .com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@ triquint .com important notice the information contained herein is belie ved to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoev er for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the user. all information contained herein is su bject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to a ny party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. datasheet: rev . a 12- 05- 14 - 6 of 6 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
|
